English  |
| Quantity: | |
|---|---|
FST-W-80200-3CR
FIRST POWER
External Stationary Charger, External Portable Charger
Material Handling Equipment
3P380VAC, 3P400VAC, 3P480VAC
80V
Product Advantage
1.This charger is certified with CE, UL, FCC, CSA, KC etc, and complies with relevant requirements for electromagnetic compatibility and safety.
2.Touch and leakage current values remain within required limits, without further measures.
3.The power factor is 0.99, therefore the available mains power is used to the maximum.
4.The charging current contains a very low ripple.
5.Charging from single or three-phase outlet.
6.Parallel connection of several chargers is possible, in order to achieve higher charging power.
7.Highly efficient (Max 95%).
8.Core Power Module is IP 67 Protection level, robust against dust, humidity, vibration etc.
Dimension：
Specifications:
Model | FST-W-48300-3CR | |
Rated Input Voltage Range | 3P 380/440/480VAC | |
Rated input frequency | 45-65Hz | |
Input power | ≤21KVA | |
Input current(Max) | 36A @3P380VAC 32A @3P440VAC 30A @3P480VAC | |
Maximum conversion efficiency | ≥95% | |
Rated output voltage | 80V | |
Max output current | 200A | |
Output voltage range | 33-106VDC | |
Max output power | 20KW | |
Communication | CAN BUS | |
Cooling method | Fans cooling | |
Operating temperature | -30°C to 50°C. Over 50 °C Power reduces | |
Relative humidity | 0%-95% | |
Protection level | IP67(Power Module) | |
Noise. | ≤20dB | |
Altitude | Below 2000m. | |
Weight | 35KG | |
Basic Function
The First Power OBC converts both single-phase and three-phase alternating current into direct current, creating galvanic isolation between the public AC grid and the DC system of the industrial fleet. This configuration enables secure battery charging while safeguarding the integrity of both grids. Charging operations are managed via a CAN interface, allowing the charger to adjust current and voltage based on signals received from the CAN. To prevent potential battery damage, the charger suspends the charging process if it does not receive signals for approximately 0.2 seconds.
Our external charger is an optimal solution for maintaining your industrial fleet in a state of readiness. It employs advanced charging technology to provide rapid and efficient charging, ensuring your batteries reach full capacity swiftly. Designed for durability, the charger is crafted with rugged construction and high-quality components that endure challenging environments. Whether you need to keep your forklifts or aerial work platforms running smoothly, our on-board charger offers the perfect combination of reliability and efficiency. Place your order today to discover the unparalleled power and performance it delivers!
Product Advantage
1.This charger is certified with CE, UL, FCC, CSA, KC etc, and complies with relevant requirements for electromagnetic compatibility and safety.
2.Touch and leakage current values remain within required limits, without further measures.
3.The power factor is 0.99, therefore the available mains power is used to the maximum.
4.The charging current contains a very low ripple.
5.Charging from single or three-phase outlet.
6.Parallel connection of several chargers is possible, in order to achieve higher charging power.
7.Highly efficient (Max 95%).
8.Core Power Module is IP 67 Protection level, robust against dust, humidity, vibration etc.
Dimension：
Specifications:
Model | FST-W-48300-3CR | |
Rated Input Voltage Range | 3P 380/440/480VAC | |
Rated input frequency | 45-65Hz | |
Input power | ≤21KVA | |
Input current(Max) | 36A @3P380VAC 32A @3P440VAC 30A @3P480VAC | |
Maximum conversion efficiency | ≥95% | |
Rated output voltage | 80V | |
Max output current | 200A | |
Output voltage range | 33-106VDC | |
Max output power | 20KW | |
Communication | CAN BUS | |
Cooling method | Fans cooling | |
Operating temperature | -30°C to 50°C. Over 50 °C Power reduces | |
Relative humidity | 0%-95% | |
Protection level | IP67(Power Module) | |
Noise. | ≤20dB | |
Altitude | Below 2000m. | |
Weight | 35KG | |
Basic Function
The First Power OBC converts both single-phase and three-phase alternating current into direct current, creating galvanic isolation between the public AC grid and the DC system of the industrial fleet. This configuration enables secure battery charging while safeguarding the integrity of both grids. Charging operations are managed via a CAN interface, allowing the charger to adjust current and voltage based on signals received from the CAN. To prevent potential battery damage, the charger suspends the charging process if it does not receive signals for approximately 0.2 seconds.
Our external charger is an optimal solution for maintaining your industrial fleet in a state of readiness. It employs advanced charging technology to provide rapid and efficient charging, ensuring your batteries reach full capacity swiftly. Designed for durability, the charger is crafted with rugged construction and high-quality components that endure challenging environments. Whether you need to keep your forklifts or aerial work platforms running smoothly, our on-board charger offers the perfect combination of reliability and efficiency. Place your order today to discover the unparalleled power and performance it delivers!
