English  |
| Quantity: | |
|---|---|
FST-C-20045-3CN
FIRST POWER
On Board Charger
Material Handling Equipment, Aerial Working Platform
1P85-265VAC, 3P380VAC, 3P400VAC, 3P480VAC
150-700V
Product Advantage
1.This charger is certified with CE, UL, FCC, CSA, KC etc, and complies with relevant requirements for electromagnetic compatibility and safety.
2.Touch and leakage current values remain within required limits, without further measures.
3.The power factor is 0.99, therefore the available mains power is used to the maximum.
4.The charging current contains a very low ripple.
5.Charging from single or three-phase outlet.
6.Parallel connection of several chargers is possible, in order to achieve higher charging power.
7.Highly efficient (Max 95%).
8.Core Power Module is IP 67 Protection level, robust against dust, humidity, vibration etc.
Dimension：
Specifications:
Model | FST-C-20045-3CN | |
Rated Input Voltage Range | 3P 380/440/480VAC,1P 110/120/220/240VAC | |
Rated input frequency | 45-65Hz | |
Input power | ≤10.5KVA | |
Input current(Max) | 18A @3P380VAC 16A @3P440VAC 15A @3P480VAC 16A @1P110/120VAC 31A @1P220/240VAC | |
Maximum conversion efficiency | ≥95% | |
Rated output voltage | 200V | |
Max output current | 45A | |
Output voltage range | 78-257VDC | |
Max output power | 10KW | |
Communication | CAN BUS | |
Cooling method | Nature cooling | |
Operating temperature | -30°C to 50°C. Over 50 °C Derate | |
Relative humidity | 0%-95% | |
Protection level | IP67 | |
Noise | ≤20dB | |
Altitude | Below 2000m. | |
Weight | 9KG | |
Basic Function
The First Power OBC converts both single-phase and three-phase alternating current into direct current while establishing galvanic isolation between the public AC grid and the DC system of the industrial fleet. This setup facilitates battery charging while ensuring the safety of both grids. Charging parameters such as current and voltage are governed by CAN, with the charger adjusting these values based on signals received. As a protective measure, if the unit does not receive CAN signals for approximately 0.2 seconds, it suspends the charging process to prevent potential damage to the battery.
Our on-board charger is the ultimate solution for maintaining your industrial fleet's power and readiness. Equipped with advanced charging technology, it provides fast and efficient charging, ensuring your batteries are fully charged quickly. Designed for durability, the charger features rugged construction and high-quality components engineered to withstand even the most challenging environments. Whether you rely on forklifts or AWP equipment, our on-board charger offers a reliable and efficient solution. Place your order today to experience the unmatched power and performance it delivers!
Product Advantage
1.This charger is certified with CE, UL, FCC, CSA, KC etc, and complies with relevant requirements for electromagnetic compatibility and safety.
2.Touch and leakage current values remain within required limits, without further measures.
3.The power factor is 0.99, therefore the available mains power is used to the maximum.
4.The charging current contains a very low ripple.
5.Charging from single or three-phase outlet.
6.Parallel connection of several chargers is possible, in order to achieve higher charging power.
7.Highly efficient (Max 95%).
8.Core Power Module is IP 67 Protection level, robust against dust, humidity, vibration etc.
Dimension：
Specifications:
Model | FST-C-20045-3CN | |
Rated Input Voltage Range | 3P 380/440/480VAC,1P 110/120/220/240VAC | |
Rated input frequency | 45-65Hz | |
Input power | ≤10.5KVA | |
Input current(Max) | 18A @3P380VAC 16A @3P440VAC 15A @3P480VAC 16A @1P110/120VAC 31A @1P220/240VAC | |
Maximum conversion efficiency | ≥95% | |
Rated output voltage | 200V | |
Max output current | 45A | |
Output voltage range | 78-257VDC | |
Max output power | 10KW | |
Communication | CAN BUS | |
Cooling method | Nature cooling | |
Operating temperature | -30°C to 50°C. Over 50 °C Derate | |
Relative humidity | 0%-95% | |
Protection level | IP67 | |
Noise | ≤20dB | |
Altitude | Below 2000m. | |
Weight | 9KG | |
Basic Function
The First Power OBC converts both single-phase and three-phase alternating current into direct current while establishing galvanic isolation between the public AC grid and the DC system of the industrial fleet. This setup facilitates battery charging while ensuring the safety of both grids. Charging parameters such as current and voltage are governed by CAN, with the charger adjusting these values based on signals received. As a protective measure, if the unit does not receive CAN signals for approximately 0.2 seconds, it suspends the charging process to prevent potential damage to the battery.
Our on-board charger is the ultimate solution for maintaining your industrial fleet's power and readiness. Equipped with advanced charging technology, it provides fast and efficient charging, ensuring your batteries are fully charged quickly. Designed for durability, the charger features rugged construction and high-quality components engineered to withstand even the most challenging environments. Whether you rely on forklifts or AWP equipment, our on-board charger offers a reliable and efficient solution. Place your order today to experience the unmatched power and performance it delivers!
